Product Support Freezeless Hydrants | Angle Sill Faucets
Prier Partsfinder Troubleshooting Techniques and Replacement Parts
7. C-134KT-807 Complete Rebuild Kit
Part number C-134KT-807 includes Prier's oval handle and screw, stem packing and beveled bibb washers for both pre-1972 and post-1972 hydrants.
Before 1972 Prier utilized a 1/4 L Beveled Bibb Washer for our Freezeless Hydrants.
After 1972 Prier used a OO Beveled Bibb Washer for this style of Freezeless Hydrant.
To determine the proper replacement bibb washer, you need to determine the following:
a. Length of the stem, from brass tip to brass tip. Do not include the rubber bibb washer in this measurement.
b. The "A" Dimension as shown on the picture below. This "A" Dimension will either be 1/2" or 9/16". A caliper may be necessary to determine this dimension.
c. Using the acquired dimensions, determine which bibb washer is required from the chart below:
"A" Dimension |
CC |
4" |
6" |
8" |
10" |
12" |
14" |
18" |
24" |
|
B Style-mfg 1954-1961 |
9/16" |
8 1/16" | 10 1/16" | 12 1/16" | 14 1/16" | 16 1/16" | 18 1/16" | 22 1/16" | 28 1/16" | |
C Style-mfg 1961-1963 |
9/16" |
7 1/16" | 9 1/16" | 11 1/16" | 13 1/16" | 15 1/16" | 17 1/16" | 21 1/16" | 27 1/16" | |
D Style-mfg 1963-1972 |
9/16" |
7 5/8" | 9 5/8" | 11 5/8" | 13 5/8" | 15 5/8" | 17 5/8" | 21 5/8" | 27 5/8" | |
E Style-mfg 1972-present |
1/2" |
5 1/16" | 7 9/16" | 9 9/16" | 11 9/16" | 13 9/16" | 15 9/16" | 17 9/16" | 21 9/16" | 27 9/16" |
